In the seafood processing industry, the quick freezing process is the key to determining product quality, shelf life, and market acceptance. However, many companies still face the following challenges in frozen product processing:
1. Loss of color and taste: Traditional quick freezing technology causes cell rupture due to large temperature fluctuations and slow freezing speed, leading to problems such as browning, juice loss, and loose meat texture after thawing.
2. High energy consumption and high costs: Old equipment has low operating efficiency and serious energy waste, which increases the operating costs of enterprises.
3. Difficulty in standardized production: Different aquatic raw materials (such as fish fillets, shrimp, fish heads) have varying requirements for freezing conditions, and there is a lack of customized solutions, resulting in unstable product consistency.
4. Risk of cold chain breakage: The incomplete management of the entire chain from quick freezing to transportation and warehousing can easily cause quality fluctuations and affect the trust of end customers.
CBFI's solution: Deeply cultivating the aquatic cold chain for 20 years, with * * -35 ℃ low-temperature quick freezing technology * * as the core, customized full process solutions for different aquatic products, solving the above pain points from the root and helping enterprises enhance competitiveness.
CBFI core technology: advantages of -35 ℃ ultra-low temperature quick freezing technology
1. Quickly lock freshness and restore the original flavor of the ocean
• Temperature advantage: The ultra-low temperature environment of -35 ℃ increases the rate of ice crystal formation in aquatic product cells by three times, resulting in smaller ice crystal particle size, reducing cell structure damage, and avoiding juice loss.
• Color protection: Rapid freezing inhibits oxidation reactions, and frozen products such as fish and shrimp maintain their fresh and vibrant color even after thawing.
• Taste retention: By precise temperature control, the original freshness, tenderness, and elasticity of aquatic products are maximally preserved, especially suitable for high-end frozen food markets that are sensitive to taste.
2. Stability and consistency improvement
• Constant temperature freezing system: using intelligent temperature control modules, the temperature difference during the freezing process is controlled within ± 1 ℃, avoiding quality differences caused by temperature fluctuations in traditional equipment.
• Segmented freezing process: Design independent freezing procedures for different aquatic characteristics (such as high-fat fish being prone to oxidation and shellfish being prone to shrinkage) to ensure that each type of product meets quality standards.
3. Energy consumption optimization and cost control
• Variable frequency energy-saving technology: The equipment can automatically adjust power according to the load, saving 20% -35% energy compared to traditional equipment.
• Modular design: supports flexible expansion of production lines, reduces initial investment pressure, and is suitable for diverse needs from small and medium-sized enterprises to large processing plants.
CBFI product matrix: covering all categories of aquatic product processing scenarios
1. Core equipment - Low temperature freezer
•Applicable scenarios: rapid freezing of high value-added products such as fish fillets, shrimp, fish mince, crab meat, etc.
• Core parameters:
• Minimum ambient temperature: -35 ℃
• Freezing speed: Complete core temperature below -18 ℃ within 60 minutes (traditional equipment requires more than 90 minutes).
• Energy efficiency ratio: 1.5kW · h/kg (industry average 2.2kW · h/kg).
• Intelligent functions: support remote monitoring, fault warning, and data recording (compliant with FDA/GMP standards).
2. Customized solutions
• Frozen product classification freezing plan:
• Fish (such as cod and salmon): pre cooled+ultra-low temperature rapid freezing to prevent fat oxidation.
• Shrimp (such as prawns and prawns): Segmented freezing technology to avoid damage to shrimp shells and softening of meat.
• Shellfish (such as scallops and scallops): Microwave assisted freezing is used to shorten the freezing time while reducing water loss.
3. Intelligent cold chain management system
• Integrated control from processing to warehousing: The equipment can be integrated with the enterprise ERP system to monitor frozen quality, inventory status, energy consumption, and other data in real-time.
• Blockchain traceability support: Record the freezing parameters and transportation temperature of each batch of frozen products to meet the compliance requirements for exporting to the EU and North American markets.
https://www.icemachinesource.com/iqf-quick-freezer/
If you are interested in more details about this product,please contact with
E-mail:cbfi@icemakerchina.com
Mobile: +86-18929552761 (WhatsApp/ WeChat)







